伸缩桥

特色:

• 不需要使用命令,做好了就可以工作了
• 用红石控制
• 像真的桥一样
• 可以挡水和岩浆
• 更多的红石可以让桥速度更快

使用方法:

• 建设桥体本身(可以是木头, 石头, 石块 的 Slabs)
• 确保最少3面有障碍物挡住桥体(让桥体只能移动往一个方向)
• 在桥移动的方向, 确保有障碍物挡住桥体移动
• 给桥体下方的方块通电. 注意: 是桥体下方的方块,而不是桥体本身!
• 假如你用给更多的方块通电,速度会加倍
• 确保你的桥彻底伸出以后依旧和红石连接
• 当桥体通电以后会向西或南移动, 断电后会向东或北移动
• 下面是个例子, 桥体为3X4. 只有一个方块通了电

Hints and tips:

• The bridge has to be at least two blocks long on each side, and it must be rectangular. It can’t have holes or bits sticking out. It also can’t abut any other blocks of the same height and material (when open or closed), since the plugin will think they are meant to be part of the bridge.
• I highly recommend to make the distance the bridge can move less than its length. That way, the blocks at the forward edge of the bridge (when it is open) are always in contact with the bridge, so you only have to power one of those blocks.
• The bridge will go through (and hold back) water and lava, so you can make water gates and water or lava traps with them.
• The blocks that stop the bridge when it retracts can be steps or stairs. This way you get a smooth walking experience when the bridge is closed, without having to jump, if you are using slabs/half-blocks for the bridge. Here is an example to show what I mean (the bridge is closed in this example, and there are wooden stair blocks on each end):

伸缩门/闸门

特色:

• 无指令:D
• 红石控制
• 就像真的闸门
• 可以控制水和岩浆

使用方法:

• 用栅栏做门(栅栏上面可以放栅栏)
• 做门框, 确保有足够的空间让门上下移动(一定要封顶)
• 用红石或者开关给门框通电. 通电的方块旁边要有栅栏
• 就像这样:

• 通电往上走, 断电往下走(直到碰到障碍物)
• 重要: 确保门本身始终连接着至少一个红石电路
• 当门断电的时候,就开始下降, 并且很快
• Decorate the gate by building walls in front of and behind the portcullis to cover the empty space and to make it appear the portcullis is moving in a groove. Of course you can make it look any way you want! Here is an example:

Hints and tips:

• The portcullis can be any size you want, as long as it is at least two blocks wide and two blocks high. It must be rectangular though, and have no holes. If the portcullis breaks, it won’t move any more until you repair it.
• Try to make the empty space above the portcullis one block less high than the portcullis itself (like in the first picture above). That way, you only need to power one block (the one in the middle on either side), since that block will always be in contact with the portcullis.
• Of course the empty space can be even smaller, if you want. The portcullis only has to go up two blocks to let people through, or three if you want the passage to be a little less claustrophobic.
• The portcullis will go through (and hold back) water and lava, so you can make water gates and water or lava traps with them.